Electrical Requirements for the Innerlight 2 Person Outdoor Sauna

To power your new Innerlight 2 person outdoor sauna, you will need to have a licensed electrician install the following power point.

Required Power Point:

• 3 Flat Pin 15 Amp Socket
• Compliant with Australian electrical standards
• Maximum Power for the Innerlight 2 person outdoor sauna 2700W

Sauna Electrical Details:

• Power Cable Length: 5 meters
• Cable Location: Runs from the top back of the sauna
• Maximum Power Requirement: 

The sauna comes equipped with a 3 flat pin 15 amp plug. This requires a matching power point to be installed by a qualified electrician. This power point is necessary to safely and properly power the sauna.

This power point must be installed by a licensed electrician prior attempting to use your new Innerlight 2 person outdoor sauna. Proper electrical setup is essential for the safe and reliable operation of your sauna.

If you have any other questions, please don't hesitate to contact our customer support team. We're here to help ensure you have a smooth and successful sauna installation

 

This is the power point required or similar

This is the plug used on the sauna cable

 

Return to the Innerlight Infrared 2 person outdoor sauna